{"title":"Cars","description":"","products":[{"product_id":"car-sauce-dip-holder-for-fries-fast-food","title":"Car Sauce Dip Holder For Fries Fast Food","description":"Fast Food Sauce\/Dip Holder For The Car. One Style Clips Into Your Air Vent And The Other Slides Into Your Disc Tray. The Double Holder Style Is Recommended For Longer Elongated Air Vents (Usually In The Centre Of The Dashboard) And The Single Is Reccomended For Shorter Smaller Air Vents Located Towards The Outside Of The Interior. The Disc Tray Holder Can Only Fit In The Disc Tray Without The Disc In It. Every Sauce Holder Can Hold A Pot Of Fast Food Sauce In Horizontal Or Vertical Postioins. Will Fit Most Sauce Pots. Note The Vent Style Holders Will Not Fit The Round 'Pop Out' Rotary Style Vents And Only Fit The 'Slat Style' Air Vents Shown In The Pictures. Sauce Not Included.","brand":"3DCabin","offers":[{"title":"Black \/ Disc Tray","offer_id":31412988018752,"sku":"3D CSH DISC T BLACK","price":8.39,"currency_code":"GBP","in_stock":true},{"title":"Grey \/ Disc Tray","offer_id":31412988051520,"sku":"3D CSH DISC T GREY","price":8.39,"currency_code":"GBP","in_stock":true},{"title":"White \/ Disc Tray","offer_id":31412988084288,"sku":"3D CSH DISC T WHITE","price":8.39,"currency_code":"GBP","in_stock":true},{"title":"Black \/ Double","offer_id":31412988117056,"sku":"3D CSH DUAL BLACK","price":8.39,"currency_code":"GBP","in_stock":true},{"title":"Grey \/ Double","offer_id":31412988149824,"sku":"3D CSH DUAL GREY","price":8.39,"currency_code":"GBP","in_stock":true},{"title":"White \/ Double","offer_id":42483656720535,"sku":"3D CSH DUAL WHITE","price":8.39,"currency_code":"GBP","in_stock":true},{"title":"Black \/ Single","offer_id":31412988215360,"sku":"3D CSH SNGL BLACK","price":4.79,"currency_code":"GBP","in_stock":true},{"title":"Grey \/ Single","offer_id":31412988248128,"sku":"3D CSH SNGL GREY","price":4.79,"currency_code":"GBP","in_stock":true},{"title":"White \/ Single","offer_id":31412988280896,"sku":"3D CSH SNGL WHITE","price":4.79,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0234\/6267\/4496\/files\/3dcabin-car-black-disc-tray-car-sauce-dip-holder-for-fries-fast-food-13690958577728.jpg?v=1722815738"},{"product_id":"clutch-alignment-tool-compatible-with-bmw-pre-2003-10-spline","title":"Clutch Alignment Tool (Compatible With Bmw Pre-2003 10 Spline)","description":"Clutch Alignment Tool. 10 Spline Compatible With BMW Pre 2003 Clutch.  Spline width approx 28mm.  The tip of the tool is approx 15mm.","brand":"3DCabin","offers":[{"title":"Default Title","offer_id":31412988411968,"sku":"3D CAT 1 GREY","price":11.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0234\/6267\/4496\/files\/3dcabin-car-default-title-clutch-alignment-tool-compatible-with-bmw-pre-2003-10-spline-13711905292352.jpg?v=1722815818"},{"product_id":"dacia-duster-drivers-door-knee-rest-black","title":"Dacia Duster Drivers Door Knee Rest : Black","description":"Many Drivers Of The Dacia Duster Report Discomfort On Longer Journeys Where Their Knee Rests On The Blunt Edge Of The Drivers Door Speaker\/Window Switch Binnacle. This Plastic Knee Rest Is Designed To Improve The Surface Area At The Correct Angle For Your Knee To Rest Upon When Your Foot Is On The Accelerator Thus Improving Comfort. Can Be Fitted In A Few Mins With The Three Screws Provided.","brand":"3DCabin","offers":[{"title":"Left Hand Drive","offer_id":31412997455936,"sku":"3D DD KNEE LHD","price":11.99,"currency_code":"GBP","in_stock":true},{"title":"Right Hand Drive","offer_id":31412997488704,"sku":"3D DD Knee RHD","price":11.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0234\/6267\/4496\/files\/3dcabin-car-left-hand-drive-dacia-duster-drivers-door-knee-rest-black-13712001335360.jpg?v=1722817273"},{"product_id":"dacia-duster-mobile-phone-bracket-holder-rhd-mount-black","title":"Dacia Duster Mobile Phone Bracket\/Holder : Rhd Mount Black","description":"\u003cp\u003eThis Phone Holder Is Specifically Designed For The Dacia Duster Dashboard. This Design Unlike All Others Removes The Need For Long Stick On Arms, Feeble Clips On The Air Vents Or Brackets Blocking The Radio Or Centre Controls. Currently Available With Three Sizes Of Holder To Cover Most Phones And Even Those With Thicker More Protective Phone Cases. Simply Attaches As Per The Pictures With Two Small Screws. You Could Try To Stick This To The Dash But Given The Texture Of The Dash We Have Not Tried This, Plus The Screw Holes Are Really Quite Small If You Ever Want To Remove The Bracket. Please Compare Your Phone To The Detailed Sizes Below. ***Small Size Phone Up To : 75Mm Width By 14Mm Depth ***Medium Size Phones Up To : 80Mm Width By 13Mm Depth ***Large Size Phones Up To : 85Mm Width By 13Mm Depth. Please Note Does Not Fit Latest 2018 Mode Dusterl.\u003c\/p\u003e","brand":"3DCabin","offers":[{"title":"Large","offer_id":31412997521472,"sku":"3D DD PH 3","price":17.51,"currency_code":"GBP","in_stock":true},{"title":"Medium","offer_id":31412997554240,"sku":"3D DD PH 2","price":17.51,"currency_code":"GBP","in_stock":true},{"title":"Small","offer_id":31412997587008,"sku":"3D DD PH 1","price":17.51,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0234\/6267\/4496\/files\/3dcabin-phone-mount-large-dacia-duster-mobile-phone-bracket-holder-rhd-mount-black-13712013819968.jpg?v=1722817249"},{"product_id":"tesla-model-s-mobile-charging-cable-wall-mount-holder-bracket","title":"Tesla Model S Mobile Charging Cable Wall Mount \/ Holder \/ Bracket","description":"A Specaily Designed Wall Mount \/ Wall Holder \/ Wall Bracket For The Tesla Model S' Mobile Charging Cable. Enables You To Keep The Cable Off Of The Floor, Relieve Cable Tension, Prevent Triping Hazards, Manage Your Cables Effectively And Prevent Damage. Great For Mounting In Your Garage. Bracket Only (Charging Cable Not Included).","brand":"3DCabin","offers":[{"title":"Black","offer_id":31413004304448,"sku":"3D TSCHARGE WM 1 BLACK","price":8.39,"currency_code":"GBP","in_stock":true},{"title":"Grey","offer_id":31413004337216,"sku":"3D TSCHARGE WM 1 GREY","price":8.39,"currency_code":"GBP","in_stock":true},{"title":"White","offer_id":31413004369984,"sku":"3D TSCHARGE WM 1 WHITE","price":8.39,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0234\/6267\/4496\/files\/3dcabin-car-black-tesla-model-s-mobile-charging-cable-wall-mount-holder-bracket-13708413042752.jpg?v=1722818370"},{"product_id":"dacia-duster-headrest-takeaway-fastfood-shopping-groceries-hanger","title":"Dacia Duster Headrest Takeaway Fastfood Shopping Groceries Hanger","description":"Headrest Hanger specifically designed for 13mm Dacia Headrest tubes. Fits around the headrest tube allowing bags etc to be suspended safely behind the front passengers. Fits the same on driver and passenger sides. Ideal for carrying take away or shopping bags to prevent them rolling around on the chairs, floor or in the boot.","brand":"3DCabin","offers":[{"title":"Default Title","offer_id":31438219051072,"sku":"3D DDHR 1 BLACK","price":5.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0234\/6267\/4496\/files\/3dcabin-car-default-title-dacia-duster-headrest-takeaway-fastfood-shopping-groceries-hanger-13717567995968.jpg?v=1722819008"},{"product_id":"car-parcel-shelf-umbrella-mount-black","title":"Car Parcel Shelf Umbrella Mount: Black","description":"A two piece bracket that fits on the underside of our vehicles parcel shelf to hold your umbrella. Great for keeping the wet umbrella away from other items in the boot, and great for preventing the umbrella from getting dirty or damaged. Never forget your umbrella again.","brand":"3DCabin","offers":[{"title":"Default Title","offer_id":31439997534272,"sku":"3D PSUH 1 BLACK","price":8.39,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0234\/6267\/4496\/files\/3dcabin-car-default-title-car-parcel-shelf-umbrella-mount-black-13720439291968.jpg?v=1722818987"},{"product_id":"volkswagen-polo-gti-rear-diffuser-4-fin-2015-2017","title":"VW Polo GTI Rear Diffuser 4 Fin (2015-2017)","description":"(3.5mm thickness shown in pictures, since has been updated to 5mm). Volkswagen Polo GTI Rear Diffuser kit. Fits 2015-2017 models only. Includes four separate fins, two left and two right. Fixes to the underside of your own plastic bumper with two small self tapping screws each (8 screws in total). Gloss black finish. Ideal for those who do not want to drill into metal body panels and don't want to damage the car. Very small screws that leave next to no holes behind if wanting to return the car back to stock. Fixes on the underside of the bumper so fixings are not visible. Provides an aggressive look within the style of the vehicle. Note, care should be taken when washing the vehicle. Screws included, Volkswagen Polo GTI and bumper NOT INCLUDED.","brand":"3DCabin","offers":[{"title":"Default Title","offer_id":36298140713111,"sku":"3D RD PGTI 1","price":53.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0234\/6267\/4496\/files\/3dcabin-car-default-title-vw-polo-gti-rear-diffuser-4-fin-2015-2017-19130632077463.png?v=1722819106"},{"product_id":"gt86-aero-rear-diffuser-kit-6-fin","title":"GT86 Aero Rear Diffuser Kit (6 Fin)","description":"Toyota GT86 Aero Edition Rear Diffuser kit. Fits Aero models only. Includes six separate fins, three left and three right. Fixes to the underside and inside of the plastic bumper with three small self tapping screws each (18 screws in total). Gloss black finish. Ideal for those who do not want to drill into metal body panels and don't want to damage the car. Very small screws that leave next to no holes behind if wanting to return the car back to stock. Attaches in discreet locations so fixings are not visible. Provides an aggressive look within the style of the vehicle. Secured very tightly. Note, care should be taken when washing the vehicle, but this should not be a problem (jet wash friendly). Ground clearance is reduced only very slightly, and speed bumps are no issue. Installation time approximately 10-15 minutes. Screws included, Toyota GT86 Aero vehicle NOT INCLUDED. (Be warned lowered cars may have issues with clearance).","brand":"3DCabin","offers":[{"title":"Default Title","offer_id":36360613658775,"sku":"3D RD GT86 AERO 1","price":71.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0234\/6267\/4496\/files\/3dcabin-car-default-title-gt86-aero-rear-diffuser-kit-6-fin-19347819790487.png?v=1722819162"},{"product_id":"gt86-brz-frs-rear-diffuser-kit-standard-6-fin","title":"GT86 BRZ FRS Rear Diffuser Kit Standard (6 Fin)","description":"Subaru BRZ, Toyota GT86 Standard Model, FRS, Rear Diffuser kit. Fits Standard models only. Includes six separate fins, three left and three right. Fixes to the underside of the plastic bumper with three small self tapping screws each (18 screws in total). Gloss black finish. Ideal for those who do not want to drill into metal body panels and don't want to damage the car. Very small screws that leave next to no holes behind if wanting to return the car back to stock. Attaches in discreet locations so fixings are not visible. Provides an aggressive look within the style of the vehicle. Secured very tightly. Note, care should be taken when washing the vehicle, but this should not be a problem (jet wash friendly). Ground clearance is reduced only very slightly, and speed bumps are no issue, although IF YOUR VEHICLE IS LOWERED INSTALL AT YOUR OWN RISK! Installation time approximately 10-15 minutes. Screws included, Toyota GT86 vehicle NOT INCLUDED.","brand":"3D Cabin","offers":[{"title":"Default Title","offer_id":36414254416023,"sku":"3D RD GT86 STAN 1","price":64.79,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0234\/6267\/4496\/files\/3d-cabin-car-default-title-gt86-brz-frs-rear-diffuser-kit-standard-6-fin-32594303418519.png?v=1722819153"},{"product_id":"jaguar-xe-rear-diffuser-fins","title":"Jaguar XE (X760) Rear Diffuser Fins - Kit For Rear Bumper (2015 - 18)","description":"Rear diffuser kit for Jaguar XE \/ X760. Four diffuser fins expertly designed for a complete flush fit. Provides an aggressive look to the back of the vehicle. Each fin attaches to the plastic bumper with 3 small self tapping screws. Easy installation, simply space evenly apart and fix into bumper. Made of tough durable PETG plastic. Designed not to infringe on ground clearance significantly, most average sized curbs are fine for clearance. Thick durable fins.\nGloss black finish. Ideal for those who do not want to drill into metal body panels and don't want to damage the car. Very small screws that leave next to no holes behind if wanting to return the car back to stock. Attaches in discreet locations so fixings are hard to see. Secured very tightly. Installation time approximately 10-15 minutes.\nNote care must be taken when contact washing the vehicle, jet wash\/power washer proof. Please note these are not performance parts and have been designed for styling. Please note this does not include the vehicle or the bumper\/garnish\/valance\/exhaust surround, 4 x diffuser fins \u0026amp; fixings ONLY.","brand":"3D Cabin","offers":[{"title":"Default Title","offer_id":39672214192279,"sku":"3D RD JXE 1","price":70.79,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0234\/6267\/4496\/files\/3d-cabin-car-default-title-jaguar-xe-x760-rear-diffuser-fins-kit-for-rear-bumper-2015-18-30151114391703.png?v=1722822413"},{"product_id":"type-2-ev-charger-holder-wall-mount-bracket-for-electric-car-charging-cable","title":"Type 2 EV Charger Plug Holder Wall Mount Bracket Socket For Electric Car Charging Cable","description":"Dual action mount for type 2 ev electric car charger cables. This is designed to fit the end that goes into the vehicle. This mount allows you to store your charger in a safe and convenient place. Prevents the charger from; laying on the floor, sitting in water, being dragged across the floor and being a trip hazard.\nThis dual purpose mount also allows you to coil the remaining length of the cable in the dedicated groove on top. The mount has been designed at an angle for the lowest profile mounting system on the market, this means that the plug is less likely to be hit or knocked and can be mounted in tighter spaces.\nMade of super durable thick PETG plastic. The bracket has a rain cover that prevents most rain from entering the socket, it also has drainage holes in the base to dispose of any water that may get inside, if any.\nFixes to the wall with two long screws and raw plugs. All fixings supplied. Pleas note that the cable is NOT included and that it is the bracket and fixings ONLY.","brand":"3D Cabin","offers":[{"title":"Black","offer_id":42485651996823,"sku":"3D T2EV WM 1 BLK","price":15.59,"currency_code":"GBP","in_stock":true},{"title":"Grey","offer_id":39884912132247,"sku":"3D T2EV WM 1 GRY","price":15.59,"currency_code":"GBP","in_stock":true},{"title":"White","offer_id":39884912066711,"sku":"3D T2EV WM 1 WHT","price":15.59,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0234\/6267\/4496\/files\/3d-cabin-car-black-type-2-ev-charger-plug-holder-wall-mount-bracket-socket-for-electric-car-charging-cable-30620088172695.png?v=1722822855"},{"product_id":"jaguar-xe-x760-centre-console-organiser-tray","title":"Jaguar XE Interior Centre Console Organiser Tray - Black","description":"Centre Console Organiser tray storage unit for Jaguar XE (2016 - Onwards) friction fits into the centre unit underneath the armrest allowing you to organise the smaller items that normally fall to the bottom of the space. Easy installation simply press down into the pocket and it will hold itself in place. \nCustom designed cut outs still allow access to the ports and SD card slot in the car, with holes to allow cables to pass through with ease. Two trays allow you to organise your smaller possessions and coins for quick and easy access. Black Finish and made of tough durable PETG which does not require any screws or require any modification to the car.  Installation time approximately \u0026gt;1 minute.\nPlease note only Centre Console Tray is included, Jaguar XE and any related accessories shown are not included.","brand":"3D Cabin","offers":[{"title":"Default Title","offer_id":40664190058647,"sku":"3D JXE CCOT 1","price":16.79,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0234\/6267\/4496\/files\/3d-cabin-car-default-title-jaguar-xe-interior-centre-console-organiser-tray-black-31907036266647.png?v=1722824074"},{"product_id":"headrest-hook-for-t5-t6-transporter-back-seat-double-hook-heavy-duty-for-auto","title":"Headrest Hook For T5 T6 Transporter Back Seat Double or Triple Hook Heavy Duty","description":"[Multifunction] 3D Cabin custom headrest hook for transporter t5 t5.1 and t6 converts your vans headrest into a useful space to hang handbags, umbrellas, spare clothes, backpacks, hiking equipment. The custom shape specifically tailored to transporter vans allow for a neat and secure attachment.[Universal] Fits headrest bars approximately 134mm internal spacing \u0026amp; 15mm bar diameter.[Sturdy and Durable] Either a choice of two or three equally spaced sturdy hooks that protrude 5cm away from the headrest rails made of tough durable PETG. Lightweight and compact design does not intrude on space in the rear of your van.[Simple Installation] Easy and quick to install with no tools required. Simply remove your headrest from the seat and slide the hook unit up on to the rails and reinstall the headrest and adjust to your preferred height.[Space Saver] Perfect for saving space in your van and having space to store groceries or other items that would otherwise fly around in the back. \nUSE AT YOUR OWN RISK when using vehicles that have rear seats with passengers in, as in the event of an accident the hooks protrude and could cause injury. Also check out our seller profile for more variations!","brand":"3D Cabin","offers":[{"title":"Black \/ Double Hook","offer_id":41195063312535,"sku":"3D T5HH DB 1 BLK","price":11.99,"currency_code":"GBP","in_stock":true},{"title":"Grey \/ Double Hook","offer_id":42485670248599,"sku":"3D T5HH DB 1 GRY","price":11.99,"currency_code":"GBP","in_stock":true},{"title":"White \/ Double Hook","offer_id":41195063345303,"sku":"3D T5HH DB 1 WHT","price":11.99,"currency_code":"GBP","in_stock":true},{"title":"Black \/ Triple Hook","offer_id":41201036787863,"sku":"3D T5HH TRP 2 BLK","price":14.39,"currency_code":"GBP","in_stock":true},{"title":"Grey \/ Triple Hook","offer_id":41201035411607,"sku":"3D T5HH TRP 2 GRY","price":14.39,"currency_code":"GBP","in_stock":true},{"title":"White \/ Triple Hook","offer_id":41201038196887,"sku":"3D T5HH TRP 2 WHT","price":14.39,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0234\/6267\/4496\/products\/HeadrestHookForT5T6TransporterBackSeatDoubleHookHeavyDutyForAutoGreyPicture1.png?v=1634128014"},{"product_id":"headrest-towel-grip-for-t5-t6-transporter-back-seat-double-clamp-heavy-duty-for-auto","title":"Headrest Towel Grip Hook For T5 T6 Transporter Seat Double Clamp Heavy Duty","description":"\u003cp data-mce-fragment=\"1\"\u003e[Multifunction] 3D Cabin custom headrest towel grip holder for transporter T5 T5.1 and T6 converts your vans headrest into a useful space to hang beach towels, clothing, gloves, dirty clothes, wet clothes and backpack\/rucksacks. The custom shape specifically tailored to transporter vans allow for a neat and secure attachment.\u003cbr data-mce-fragment=\"1\"\u003e[Sturdy and Durable] This double clamp has two equally spaced sturdy teethed grips that protrude 5cm away from the headrest rails made of tough durable PETG. Lightweight and compact design does not intrude on space in the rear of your van.\u003cbr data-mce-fragment=\"1\"\u003e[Simple Installation] Easy and quick to install with no tools required. Simply remove your headrest from the seat and slide the clamp unit up on to the rails and reinstall the headrest and adjust to your preferred height.\u003cbr data-mce-fragment=\"1\"\u003e[Space Saver] Perfect for saving space in your van and having space to store clothes or other items that would otherwise fly around in the back. \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eDO NOT USE with vehicles with rear seats as in the event of an accident the grips protrude and could cause injury.\u003c\/p\u003e","brand":"3D Cabin","offers":[{"title":"Grey","offer_id":41195164336279,"sku":"3D T5HH TH 3 GRY","price":8.39,"currency_code":"GBP","in_stock":true},{"title":"Black","offer_id":41195164369047,"sku":"3D T5HH TH 3 BLK","price":8.39,"currency_code":"GBP","in_stock":true},{"title":"White","offer_id":41195164434583,"sku":"3D T5HH TH 3 WHT","price":8.39,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0234\/6267\/4496\/files\/3d-cabin-vehicle-headrest-hangers-hooks-grey-headrest-towel-grip-hook-for-t5-t6-transporter-seat-double-clamp-heavy-duty-32685394264215.png?v=1722824100"},{"product_id":"cup-holder-insert-for-t5-t5-1-transporter-for-centre-console-tray","title":"Cup Holder Insert For T5 T5.1 Transporter For Centre Console Tray","description":"\u003cp\u003eCup Holder Insert to fit into your T5 T5.1 Transporter to fit into the original cup holder location in the centre console pull out dash tray. Works with even broken cup holders on the tray. Fits drinks cans and bottles up to 70mm in diameter. Simply insert cup holders into your original dash pull out tray for a clean and precise fit. Removable bottom cup holder coasters to make cleaning easy and honeycomb design allows for crumbs and liquid to pass through to aid in keeping the holders clean.\u003c\/p\u003e\n\u003cp\u003eMade of tough durable PETG.\u003c\/p\u003e\n\u003cp\u003eNote: Original draw will no longer be able to be closed with the cup holder insert in place.\u003c\/p\u003e","brand":"3D Cabin","offers":[{"title":"Black","offer_id":41218517532823,"sku":"3D T5CHI 1 BLK","price":17.99,"currency_code":"GBP","in_stock":true},{"title":"Grey","offer_id":41218517565591,"sku":"3D T5CHI 1 GRY","price":17.99,"currency_code":"GBP","in_stock":true},{"title":"White","offer_id":41218517598359,"sku":"3D T5CHI 1 WHT","price":17.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0234\/6267\/4496\/files\/3d-cabin-cup-holder-insert-black-cup-holder-insert-for-t5-t5-1-transporter-for-centre-console-tray-32688829857943.png?v=1722824138"},{"product_id":"hose-anti-pinch-guide-for-car-wheel-easy-slide-wash-cleaning-blue","title":"Hose Anti-Pinch Guide For Car Wheel Easy Slide Wash Cleaning Blue","description":"\u003cp\u003eOur anti-pinch hose slider for car wheels is designed to make your life easier and more efficient when washing your car by stopping the water hose becoming trapped\/pinched between your car wheel and the ground. Can also be used with many other applications such as when putting air in your car tyres, using a machine polisher and any other application involving corded power tools. Made from strong and durable PETG plastic. Available in packs of quantity two and four.\u003c\/p\u003e\u003cp\u003eWheel hose slider ONLY, hose NOT included.\u003c\/p\u003e","brand":"3DCabin","offers":[{"title":"2 PACK","offer_id":41847340695703,"sku":"3D HAPG 1 X2","price":8.99,"currency_code":"GBP","in_stock":true},{"title":"4 PACK","offer_id":41847340728471,"sku":"3D HAPG 1 X4","price":16.19,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0234\/6267\/4496\/files\/3dcabin-car-2-pack-hose-anti-pinch-guide-for-car-wheel-easy-slide-wash-cleaning-blue-34732322095255.png?v=1722825003"},{"product_id":"number-plate-mount-for-gr-supra-a90-mk5-v-front-tow-hook","title":"3D Cabin Front Tow Hook Number Plate Mount for Toyota GR Supra A90 MK5","description":"\u003cp\u003eUpgrade the front-end aesthetics of your Toyota GR Supra (A90 \/ Mk5) with the 3D Cabin Front Tow Hook Number Plate Mount. Traditional plate holders can disrupt the sleek lines of your vehicle, but our custom-designed mount secures your number plate at an angle that complements the bodywork, preventing it from sticking out and ruining the car's aggressive profile.\u003c\/p\u003e\n\u003cp\u003eEngineered for convenience, this mount utilizes the existing tow hook receptacle for a rapid, screw-in installation that requires no drilling or permanent modifications. It is fully compatible with standard and shortened UK number plates, as well as many international formats.\u003c\/p\u003e\n\u003cp\u003ePackage includes the mounting bracket, all necessary fixings, and double-sided adhesive tape. Available in stealth black for a clean, factory-like finish.\u003c\/p\u003e","brand":"3DCabin","offers":[{"title":"Black","offer_id":42006142812311,"sku":"3D A90 THNPM 1 BLK","price":41.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0234\/6267\/4496\/files\/NumberPlateMountForGRSupraA90MK5VFrontTowHookCarBlackPicture2.png?v=1739140203"},{"product_id":"badge-kit-for-gr-supra-a90-mk5-v-black","title":"Toyota GR Supra Badge Kit For A90 MK5\/V - Black","description":"\u003cp\u003eCustomise your GR\/A90\/MK5\/V Supra with this gloss black badge kit. This kit includes a front and a rear badge. Both come with double sided adhesive applied, ready for instant application. Designed to perfectly sit within the front and back recesses on your car, for great fit and easy alignment. A good alternative for any colour of supra. Throw away those degrading OEM badges and upgrade to these 3D professional looking badges. Choose from our different styles; T-Logo (for an original look), S-Logo (for a custom look). Made of tough and durable PETG.\u003c\/p\u003e","brand":"3D Cabin","offers":[{"title":"T-Logo","offer_id":42960852877463,"sku":"3D A90 TOY BK 1 BLK","price":64.99,"currency_code":"GBP","in_stock":false},{"title":"S-LOGO","offer_id":42960852910231,"sku":"3D A90 SUP BK 2 BLK","price":64.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0234\/6267\/4496\/files\/3d-cabin-holder-t-logo-toyota-gr-supra-badge-kit-for-a90-mk5-v-black-40577648656535.jpg?v=1722825933"},{"product_id":"kia-picanto-rdfk-gt-line-third-gen-facelift-2020-model","title":"Kia Picanto RDFK GT Line (Third Gen Facelift 2020 Model)","description":"\u003cp\u003eRear diffuser kit compatible with the Kia Picanto GT Line (Third Generation 2020 facelift model) . Includes 5 separate fins - instructions can be found on our website. Fixes to the underside and inside of the plastic bumper with two small self tapping screws or nuts \u0026amp; bolts as well as 3M tape for added security (all supplied). Black finish. Ideal for those who don’t want to drill into metal body panels and don’t want to damage the car. Very small screws which leave next to no holes behind if wanting to return the car back to stock. Attaches in discreet locations so fixings are not visible. Provides an aggressive look within the style of the vehicle.\u003c\/p\u003e \u003cp\u003e \u003c\/p\u003e \u003cp\u003eNOTE: Care should be taken when washing the vehicle however this shouldn’t be a problem (jet wash friendly). Ground clearance is reduced only very slightly and speed bumps are no issue. DISCLAIMER: excessively lowered cars may have issues with ground clearance.\u003c\/p\u003e \u003cp\u003e \u003c\/p\u003e \u003cp\u003eInstallation time approximately 20-30 minutes.\u003c\/p\u003e","brand":"3D Cabin","offers":[{"title":"Default Title","offer_id":42987779588247,"sku":"3D RD KIA PGTL 1","price":59.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0234\/6267\/4496\/files\/3d-cabin-holder-default-title-kia-picanto-rdfk-gt-line-third-gen-facelift-2020-model-38948417274007.jpg?v=1722825978"},{"product_id":"ford-fiesta-st180-200-rear-diffuser-kit-mk7-2013-2017-6-fin","title":"Ford Fiesta ST180\/200 Rear Diffuser Kit Mk7 (2013-2017) (6 Fin)","description":"\u003cp\u003eRear diffuser kit compatible with the Mk7 Fiesta ST180 \/ ST200 2013-2017. Includes 6 separate fins - instructions can be found on our website. Fixes to the underside and inside of the plastic bumper with two small self tapping screws or nuts \u0026amp; bolts as well as adhesive tape for added security (all supplied). Black finish. Ideal for those who don’t want to drill into metal body panels and don’t want to damage the car. Very small screws which leave next to no holes behind if wanting to return the car back to stock. Attaches in discreet locations so fixings are not visible. Provides an aggressive look within the style of the vehicle.\u003c\/p\u003e \u003cp\u003eCompatible with ‘ST’ rear bumpers ONLY, NOT ‘Zetec S’ or others. For ‘Zetec’ rear diffuser kit see our other listing.\u003c\/p\u003e \u003cp\u003eNOTE: Care should be taken when washing the vehicle however this shouldn’t be a problem (jet wash friendly). Ground clearance is reduced only very slightly and speed bumps are no issue. DISCLAIMER: excessively lowered cars may have issues with ground clearance.\u003c\/p\u003e \u003cp\u003eInstallation time approximately 20-30 minutes.\u003c\/p\u003e","brand":"3D Cabin","offers":[{"title":"Default Title","offer_id":42993640865943,"sku":"3D RD FST180 1","price":31.19,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0234\/6267\/4496\/files\/3d-cabin-holder-default-title-ford-fiesta-st180-200-rear-diffuser-kit-mk7-2013-2017-6-fin-38965506080919.jpg?v=1722826025"},{"product_id":"fiesta-mk7-zetec-rear-diffuser-kit-pfl-2008-2012-5-fin","title":"Fiesta Mk7 Zetec Rear Diffuser Kit PFL (2008-2012) (5 Fin)","description":"\u003cp\u003eRear diffuser kit compatible with the Mk7 Fiesta Zetec 2008-2017. Includes 5 separate fins - instructions can be found on our website. Fixes to the underside and inside of the plastic bumper with two small self tapping screws or nuts \u0026amp; bolts as well as adhesive tape for added security (all supplied). Black finish. Ideal for those who don’t want to drill into metal body panels and don’t want to damage the car. Very small screws which leave next to no holes behind if wanting to return the car back to stock. Attaches in discreet locations so fixings are not visible. Provides an aggressive look within the style of the vehicle.\u003c\/p\u003e \u003cp\u003eCompatible with ‘Zetec’ rear bumpers ONLY, NOT ‘Zetec S’ or others. For ST180 rear diffuser kit see our other listing.\u003c\/p\u003e \u003cp\u003eNOTE: Care should be taken when washing the vehicle however this shouldn’t be a problem (jet wash friendly). Ground clearance is reduced only very slightly and speed bumps are no issue. DISCLAIMER: excessively lowered cars may have issues with ground clearance.\u003c\/p\u003e \u003cp\u003eInstallation time approximately 20-30 minutes.\u003c\/p\u003e","brand":"3D Cabin","offers":[{"title":"Default Title","offer_id":42993643520151,"sku":"3D RD FZTEC 1","price":32.39,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0234\/6267\/4496\/files\/3d-cabin-holder-default-title-fiesta-mk7-zetec-rear-diffuser-kit-pfl-2008-2012-5-fin-38965532524695.jpg?v=1722825987"},{"product_id":"seat-arosa-rear-diffuser-fin-kit-2004-2004-6-fin","title":"Seat Arosa Rear Diffuser Fin Kit (2004-2004) (6 Fin)","description":"\u003cp\u003eRear diffuser kit compatible with the Arosa 2000-2004 (facelifted version). Includes 6 separate fins - instructions can be found on our website. Fixes to the underside and inside of the plastic bumper with two small self tapping screws or nuts \u0026amp; bolts as well as adhesive tape for added security (all supplied). Black finish. Ideal for those who don’t want to drill into metal body panels and don’t want to damage the car. Very small screws which leave next to no holes behind if wanting to return the car back to stock. Attaches in discreet locations so fixings are not visible. Provides an aggressive look within the style of the vehicle.\u003c\/p\u003e \u003cp\u003e \u003c\/p\u003e \u003cp\u003eNOTE: Care should be taken when washing the vehicle however this shouldn’t be a problem (jet wash friendly). Ground clearance is reduced only very slightly and speed bumps are no issue. DISCLAIMER: excessively lowered cars may have issues with ground clearance.\u003c\/p\u003e \u003cp\u003e \u003c\/p\u003e \u003cp\u003eInstallation time approximately 20-30 minutes.\u003c\/p\u003e","brand":"3D Cabin","offers":[{"title":"Default Title","offer_id":42993644994711,"sku":"3D RD SEAT ARO 1","price":35.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0234\/6267\/4496\/files\/3d-cabin-holder-default-title-seat-arosa-rear-diffuser-fin-kit-2004-2004-6-fin-38965557690519.jpg?v=1722826053"},{"product_id":"t5-transporter-side-window-vent-cover-rain-shield-guard-for-camper-van-motor-home","title":"T5 Transporter Side Window Vent Cover Rain Shield Guard For Camper Van Motor Home","description":"\u003cp\u003eAcrylic external window cover \/ panel \/ vent \/ shield for T5 \/ T5.1 Vans \/ Camper Vans \/ Motor home.\u003c\/p\u003e \u003cp\u003eAllows side windows to remain open whilst preventing rain from getting in. Prevents the well known leaking issue with this style of window, for a leak free van.\u003c\/p\u003e \u003cp\u003eProvides a vent at the bottom to allow adequate airflow but not big enough to attract attention or allowing hands reaching into the van.\u003c\/p\u003e \u003cp\u003eCreated with the similar tint to most factory fitting windows, designed to blend in with the look of your van.\u003c\/p\u003e \u003cp\u003eMade to fit onto the outside of your existing window with strong adhesive (supplied). Recommended to LIGHTLY warm the adhesive up prior to application (hair dryer or heat gun) and apply to a dry clean surface with pressure for best fit.\u003c\/p\u003e \u003cp\u003eWhen applied correctly its safe for driving within speed limits and does not create any additional noise \/ whistle \/ buffeting.\u003c\/p\u003e \u003cp\u003eFits windows with external measurement of (Width: 430mm \u0026amp; Height: 420mm ) or smaller. External vent dimensions: 516mm x 450mm. Please measure your van before purchasing. Likely to fit many other vans with similar windows.\u003c\/p\u003e \u003cp\u003eExternal vent dimensions: 516mm x 450mm\u003c\/p\u003e \u003cp\u003eVent Panel \u0026amp; Adhesive only, van not included.\u003c\/p\u003e \u003cp\u003eBeing a transparent product there may be very slight imperfections on the curves due to manufacturing processes. These are only visible up close and in no way effect the overall look.\u003c\/p\u003e \u003cp\u003e\u003c\/p\u003e","brand":"3D Cabin","offers":[{"title":"Default Title","offer_id":43005517201559,"sku":"JAB T5 VENT 1 D","price":139.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0234\/6267\/4496\/files\/3d-cabin-holder-default-title-t5-transporter-side-window-vent-cover-rain-shield-guard-for-camper-van-motor-home-39015994163351.jpg?v=1722826095"},{"product_id":"a4-s-line-b7-rear-diffuser-kit-5-fin-black","title":"A4 S-Line B7 Rear Diffuser Kit (5 Fin) - Black","description":"\u003cp\u003eRear Diffuser kit for Audi A4 B7 S-Line (2004-2007). Fits S-Line models only. Includes five separate fins (two left, one middle and two right - labelled accordingly).Fixes to the underside and inside of the plastic bumper with three small self tapping screws or nuts \u0026amp; bolts as well as adhesive tape for added security (all supplied). Black finish. Ideal for those who don't want to drill into metal body panels and don't want to damage the car. Very small screws that leave next to no holes behind if wanting to return the car back to stock. Attaches in discreet locations so fixings are not visible. Provides an aggressive look within the style of the vehicle. Note, care should be taken when washing the vehicle, but this should not be a problem (jet wash friendly). Ground clearance is reduced only very slightly and speed bumps are no issue. DISCLAIMER: excessively lowered cars may have issues with ground clearance. Installation time approximately 20-30minutes.Diffuser fins and fixings ONLY, vehicle NOT INCLUDED.\u003c\/p\u003e","brand":"3D Cabin","offers":[{"title":"Default Title","offer_id":43007105532055,"sku":"3D RD A4B7 1","price":65.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0234\/6267\/4496\/files\/3d-cabin-holder-default-title-a4-s-line-b7-rear-diffuser-kit-5-fin-black-39017432088727.jpg?v=1722826124"},{"product_id":"r32-golf-mk5-rear-diffuser-kit-6-fin-black","title":"R32 Golf Mk5 Rear Diffuser Kit (6 Fin) - Black","description":"\u003cp\u003eRear diffuser kit for the Mk5 Volkswagen Golf R32 and R32 style rear bumpers (2004-2009). Includes six separate fins which are all labelled - instructions can be found on our website. Fixes to the underside and inside of the plastic bumper with two small self tapping screws or nuts \u0026amp; bolts as well as adhesive tape for added security (all supplied). Black finish. Ideal for those who don’t want to drill into metal body panels and don’t want to damage the car. Very small screws which leave next to no holes behind if wanting to return the car back to stock. Attaches in discreet locations so fixings are not visible. Provides an aggressive look within the style of the vehicle. Note, care should be taken when washing the vehicle however this shouldn’t be a problem (jet wash friendly). Ground clearance is reduced only very slightly and speed bumps are no issue. DISCLAIMER: excessively lowered cars may have issues with ground clearance.Installation time approximately 20-30 minutes.\u003c\/p\u003e","brand":"3D Cabin","offers":[{"title":"Default Title","offer_id":43007193153687,"sku":"3D RD GR32 1","price":77.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0234\/6267\/4496\/files\/3d-cabin-holder-default-title-r32-golf-mk5-rear-diffuser-kit-6-fin-black-39017674014871.jpg?v=1722826154"},{"product_id":"r34-gtr-wall-art-plaque-display-mounted-vehicle-white-and-blue","title":"R34 GTR Wall Art Plaque Display Mounted Vehicle - White and Blue","description":"\u003cp\u003eR34 GTR wall art plaque. 3 dimensional, iconic, blue R34 GTR vehicle with black wheels mounted on a wooden backing plate \/ plaque. Featuring an engraved black logo and bevelled edges. Simply mount on the wall in your desired location. Great gift idea for car enthusiasts. Ideal for hanging in your bedroom, garage, living room and more! Size: 600x280x50mm\u003c\/p\u003e","brand":"3D Cabin","offers":[{"title":"Default Title","offer_id":43018428612759,"sku":"3D WA R34 GTR 1 WHT BLU","price":89.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0234\/6267\/4496\/files\/3d-cabin-holder-default-title-r34-gtr-wall-art-plaque-display-mounted-vehicle-white-and-blue-39061798813847.jpg?v=1722826299"},{"product_id":"anti-buffeting-wind-deflector-for-gr-supra-a90-mk5-v-foiler-diffuser-pair-default-title","title":"Anti-Buffeting Wind Deflector For GR Supra A90 MK5\/V Foiler Diffuser Pair","description":"Anti-Buffeting Wind Deflector For GR Supra A90 MK5V Foiler Diffuser�Pair. This product has been specifically designed to combat the supra wind buffeting \/ drumming \/ wob wob wob \/ pulsing bass tone when driving with both windows down or just a single window down. This unique design deflects the wind away from the windows and around the car. No wind whistle occurs either. Made of tough PETG in a gloss black finish. Attach in seconds with the pre applied adhesive. It has been tested up to high speeds. Simply peel the adhesive and firmly press them into place, lining up the inside corner first. Compliments the car with an aggressive stealth look.","brand":"3D Cabin","offers":[{"title":"Default Title","offer_id":43019052646551,"sku":"3D A90 ABWD 1","price":34.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0234\/6267\/4496\/files\/Anti-BuffetingWindDeflectorForGRSupraA90MK5VFoilerDiffuserPicture2.png?v=1739140650"},{"product_id":"badge-kit-for-gr86-brz-2022-front-back-black","title":"Badge Kit For GR86 BRZ 2022+ Front \u0026 Back - Black","description":"\u003cp\u003eCustomise your GR86\/BRZ 2022+ with this gloss black badge kit. This kit includes a front and a rear badge. Both come with double sided adhesive applied, ready for instant application. Designed to perfectly sit within the front and back recesses on your car, for great fit and easy alignment. A good alternative for any colour of GR86\/BRZ. Throw away those degrading OEM badges and upgrade to these 3D professional looking badges. Made of tough and durable PETG. Please note these badges are NOT for the previous GT86 or BRZ pre 2022.\u003c\/p\u003e","brand":"3D Cabin","offers":[{"title":"Default Title","offer_id":43067110260887,"sku":"3D GR86 TOY BK 1 BLK","price":64.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0234\/6267\/4496\/files\/3d-cabin-holder-default-title-badge-kit-for-gr86-brz-2022-front-back-black-41501406888087.jpg?v=1722826500"},{"product_id":"3d-cabin-jag-xe-louvers-rear-quarter-window-x760-2015-pair","title":"3D Cabin Jag XE Louvers Rear Quarter Window (X760) 2015+ Pair","description":"\u003cp\u003ePair of rear quarter side window louvres for Jag XE (X760) salon 2015 onwards. This does NOT fit the XF, please double check the shape of your window first. Designed to fit perfectly into the recess of the two smaller rear windows. Add some flare to the back of your car! Please note these do not have a completely smooth surface by design, it has a texture of lines finish (see photos). To apply; clean the windows thoroughly, simply peel back the applied double sided adhesive, gently warm with the adhesive with a hair dryer and apply with pressure to the window. Do not apply on dirty \/ dusty \/ wet windows or in cold temperatures. Louvres \u0026amp; applied tape ONLY, vehicle NOT included.\u003c\/p\u003e","brand":"3D Cabin","offers":[{"title":"Default Title","offer_id":43149182533783,"sku":"3D JXE SIDE LOUV 1 BLK","price":99.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0234\/6267\/4496\/files\/3d-cabin-holder-default-title-3d-cabin-jag-xe-louvers-rear-quarter-window-x760-2015-pair-39466477420695.jpg?v=1722826706"},{"product_id":"exhaust-tip-silencer-baffle-muffler-sound-dampener-for-cold-start-up","title":"Exhaust Tip Silencer Baffle Muffler Sound Dampener For Cold Start Up","description":"\u003cp\u003eThe ideal solution for modified exhaust systems that ensures a quiet morning start. Crafted for simplicity, just push and twist the silencer into place before starting your car, and effortlessly remove it using the knurl when you're ready to drive. Compatible with cars and motorbikes. Results may vary but a noticeable difference is heard when using this product. In some cases, start-up noise levels could be perceived as halved (10db reduction). See video. Experience reduced noise levels to ensuring a quieter environment for both you and your neighbours. Choose the best fit for your system with sizes ranging from 2 - 5.5 inches, covering metric units as well. A tapered design ensures a snug fit even with the most non-standard sizes of circular exhaust tips. Please Note: This version only works with circular exhaust tips only. Warning: It is made of specialized plastic so should not be left in the exhaust for more than a few minutes after starting. Should only be used when the exhaust is cold or warm to the touch. Measure the internal diameter of your exhaust tip, select the correct size from our list. Size options are in inches. If measuring in millimetres please use the table below and select the size that has your measurement closest to the middle of the range. As some overlap in sizes. Adjust the quantity based on the number of exhaust tips on your system. Compatible sizes: 2.00” = 49-53mm, 2.25” = 55-59mm, 2.50” = 61-66mm, 2.75” = 67-73mm, 3.00” = 73-79mm, 3.25” = 79-86mm, 3.50” = 85-92mm, 3.75” = 92-99mm, 4.00” = 98-106mm, 4.25” = 104-112mm, 4.50” = 110-119mm, 4.75” = 116-125mm, 5.00” = 122-132mm, 5.25\" = 128-139mm, 5.50\" = 134-145mm. For additional sound control, it allows you to add fireproof wadding into the device. Built in attachment holes to thread cord, helps keep your silencers together and aid for easy removal. Fireproof cord is recommended. (Both Not Supplied).\u003c\/p\u003e","brand":"3D Cabin","offers":[{"title":"3.00","offer_id":43646748295319,"sku":"3D EXHS 3.00 GRY","price":7.49,"currency_code":"GBP","in_stock":true},{"title":"5.00","offer_id":43646748328087,"sku":"3D EXHS 5.00 GRY","price":24.99,"currency_code":"GBP","in_stock":true},{"title":"4.00","offer_id":43646748360855,"sku":"3D EXHS 4.00 GRY","price":14.49,"currency_code":"GBP","in_stock":true},{"title":"4.50","offer_id":43646748393623,"sku":"3D EXHS 4.50 GRY","price":18.49,"currency_code":"GBP","in_stock":true},{"title":"2.25","offer_id":43646748426391,"sku":"3D EXHS 2.25 GRY","price":5.49,"currency_code":"GBP","in_stock":true},{"title":"3.50","offer_id":43646748459159,"sku":"3D EXHS 3.50 GRY","price":10.49,"currency_code":"GBP","in_stock":true},{"title":"2.00","offer_id":43646748491927,"sku":"3D EXHS 2.00 GRY","price":5.49,"currency_code":"GBP","in_stock":true},{"title":"2.50","offer_id":43646748524695,"sku":"3D EXHS 2.50 GRY","price":5.49,"currency_code":"GBP","in_stock":true},{"title":"4.75","offer_id":43646748557463,"sku":"3D EXHS 4.75 GRY","price":22.49,"currency_code":"GBP","in_stock":true},{"title":"3.75","offer_id":43646748590231,"sku":"3D EXHS 3.75 GRY","price":12.49,"currency_code":"GBP","in_stock":true},{"title":"2.75","offer_id":43646748622999,"sku":"3D EXHS 2.75 GRY","price":6.49,"currency_code":"GBP","in_stock":true},{"title":"4.25","offer_id":43646748655767,"sku":"3D EXHS 4.25 GRY","price":16.49,"currency_code":"GBP","in_stock":true},{"title":"3.25","offer_id":43646748688535,"sku":"3D EXHS 3.25 GRY","price":8.99,"currency_code":"GBP","in_stock":true},{"title":"5.25","offer_id":43683415982231,"sku":"3D EXHS 5.25 GRY","price":28.49,"currency_code":"GBP","in_stock":true},{"title":"5.50","offer_id":43683416014999,"sku":"3D EXHS 5.50 GRY","price":31.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0234\/6267\/4496\/files\/3d-cabin-holder-3-00-exhaust-tip-silencer-baffle-muffler-sound-dampener-for-cold-start-up-40771820781719.jpg?v=1722828344"},{"product_id":"cup-holder-insert-for-t5-t5-1-transporter-centre-console-tray-upgrade-2003-2015","title":"Cup Holder Insert For T5 T5.1 Transporter Centre Console Tray Upgrade 2003 - 2015","description":"\u003cp\u003eCup holder insert \/ replacement to fit into your T5 T5.1 Transporter to fit into the original cup holder location in the centre console pull out dash tray. Works with even broken cup holders on the tray. Compatible with 2003 to 2015.\u003c\/p\u003e \u003cp\u003eFits drinks cans and bottles up to 70mm in diameter. Simply insert cup holders into your original dash pull out tray for a clean and precise fit.\u003c\/p\u003e \u003cp\u003eRemovable bottom cup holder coasters to make cleaning easy and honeycomb design allows for crumbs and liquid to pass through to aid in keeping the holders clean. \u003c\/p\u003e \u003cp\u003eThis is not like other cup holders it is made of tough durable PETG. Which is more resistant to sunlight fade when comparing it to materials like ABS and PLA.\u003c\/p\u003e \u003cp\u003eNew updated design to suit your interior best with engraved T5 text and cut out window to view whats inside, unlike others.\u003c\/p\u003e \u003cp\u003eNote: Original draw will no longer be able to be closed with the cup holder insert in place.\u003c\/p\u003e","brand":"3D Cabin","offers":[{"title":"White","offer_id":44192767606935,"sku":"3D T5CHI V2 WHT","price":13.99,"currency_code":"GBP","in_stock":true},{"title":"Black","offer_id":44192767639703,"sku":"3D T5CHI V2 BLK","price":13.99,"currency_code":"GBP","in_stock":true},{"title":"Grey","offer_id":44192767672471,"sku":"3D T5CHI V2 GRY","price":13.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0234\/6267\/4496\/files\/3d-cabin-holder-white-cup-holder-insert-for-t5-t5-1-transporter-centre-console-tray-upgrade-2003-2015-41659101511831.jpg?v=1722828660"},{"product_id":"reflector-covers-blanks-plates-compatible-with-gr-supra-a90-mk5-v-rear-bumper-diffuser","title":"Reflector Covers Blanks Plates Compatible With GR Supra A90 MK5\/V Rear Bumper Diffuser","description":"\u003cp\u003eIntroducing our blanking plates \/ covers for the reflectors located on the rear bumper of the GR Supra A90 MK5\/V. These are a simple and stylish addiction to your vehicle to give it a cleaner look. They attach with the provided adhesive over the top of the existing reflectors. Designed to fit perfectly in the gap and easy to install. Blanking plates pair and adhesive only, vehicle not included.\u003c\/p\u003e","brand":"3D Cabin","offers":[{"title":"Default Title","offer_id":44222242390167,"sku":"3D A90 RRC 1 BLK","price":9.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0234\/6267\/4496\/files\/3d-cabin-holder-default-title-reflector-covers-blanks-plates-compatible-with-gr-supra-a90-mk5-v-rear-bumper-diffuser-41739022139543.jpg?v=1722828612"},{"product_id":"keyring-compatible-with-gr-supra-a90-mk5-v-mk4-iv","title":"Keyring Compatible With GR Supra A90 MK5\/V MK4\/IV","description":"\u003cp\u003eTwo tone keyring compatible with GR Supra A90 MK5\/V MK4\/IV. Great accessory for your keys. Made of strong and durable plastic. Perfect size for easy to use and clutter free keys. Fob and keyring included.\u003c\/p\u003e","brand":"3D Cabin","offers":[{"title":"Red","offer_id":44283152957591,"sku":"3D A90 SUP KR 1 BLK-RED","price":4.99,"currency_code":"GBP","in_stock":true},{"title":"Blue","offer_id":44283152990359,"sku":"3D A90 SUP KR 1 BLK-BLU","price":4.99,"currency_code":"GBP","in_stock":true},{"title":"White","offer_id":44283153023127,"sku":"3D A90 SUP KR 1 BLK-WHT","price":4.99,"currency_code":"GBP","in_stock":true},{"title":"Grey","offer_id":44283153055895,"sku":"3D A90 SUP KR 1 BLK-GRY","price":4.99,"currency_code":"GBP","in_stock":true},{"title":"Yellow","offer_id":44283153088663,"sku":"3D A90 SUP KR 1 BLK-YEL","price":4.99,"currency_code":"GBP","in_stock":true},{"title":"Orange","offer_id":44283153121431,"sku":"3D A90 SUP KR 1 BLK-ORG","price":4.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0234\/6267\/4496\/files\/3d-cabin-holder-red-keyring-compatible-with-gr-supra-a90-mk5-v-mk4-iv-41857006239895.jpg?v=1722828696"},{"product_id":"number-plate-mounting-clips-quick-release-connect-pair-stick-or-screw","title":"Number Plate Mounting Clips - Quick Release \/ Connect - Pair - Stick Or Screw","description":"\u003cp\u003eFit: Designed for standard UK 111mm height number plates, and compatible with any plate of the same height and up to 4mm thick, regardless of origin. Also works with reduced widths, 3D gel, and 4D text. Verify your plate size before purchase.\u003c\/p\u003e \u003cp\u003eQuick \u0026amp; Easy Removal: Ideal for cleaning behind number plates or swapping them for car shows, these clips allow for effortless slot-and-clip installation and removal.\u003c\/p\u003e \u003cp\u003eMinimalist Design: Engineered to display only a thin black line at the top and bottom, these clips offer a sleek, unobtrusive appearance.\u003c\/p\u003e \u003cp\u003eFlexible Installation: Compatible with existing bolt holes or self-tapping screws, and includes pre-applied adhesive for a drill-free, quick installation option.\u003c\/p\u003e \u003cp\u003eDurable \u0026amp; Weather-Resistant: Constructed from robust PETG material, these clips are UV and weather-resistant, ensuring long-lasting performance. (Pair of clips with pre-applied adhesive only, number plate not included).\u003c\/p\u003e","brand":"3D Cabin","offers":[{"title":"Default Title","offer_id":54144584909185,"sku":"3D NPMC 1 BLK","price":7.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0234\/6267\/4496\/files\/1f7383dc-cbeb-4ced-8de3-2f4c17f74142.jpg?v=1742312950"},{"product_id":"quick-release-steering-wheel-hanger-hook-mount-clip-for-sun-visors-universal","title":"Quick Release Steering Wheel Hanger Hook Mount Clip For Sun Visors Universal","description":"\u003cp\u003eEffortless Installation - Simply slots in and out of place, no tools required. Optimising driving field of view.\u003c\/p\u003e \u003cp\u003eConvenient and Stylish - Offers immediate access, and a great display position, surpassing rear-view mirror-mounted alternatives.\u003c\/p\u003e \u003cp\u003eUniversal Size Accommodation - Designed for steering wheels up to 40mm in thickness and fits various sizes of sun visors.\u003c\/p\u003e \u003cp\u003eCompact Storage - Easily stored in a glove box or pocket when not in use.\u003c\/p\u003e \u003cp\u003eDamage-Free Design - Smooth material and carefully crafted design prevent scratches and damage to roof lining and sun visor. Made of durable UV resistant PETG plastic.\u003c\/p\u003e","brand":"3D Cabin","offers":[{"title":"Default Title","offer_id":54154802823553,"sku":"3D SWSVH 1 BLK","price":6.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0234\/6267\/4496\/files\/9be60c17-0def-4f40-80f1-0fe0da814cda.jpg?v=1744815327"},{"product_id":"number-plate-mount-for-gr-supra-a90-mk5-v-quick-release-front-tow-hook","title":"Number Plate Mount For GR Supra A90 MK5\/V - Quick Release Front Tow Hook","description":"\u003cp\u003eQuick release \/ disconnect front tow hook number plate mount 3D Cabin compatible with Toyota GR Supra \/ A90 \/ Mk5 \/ MkV. Specifically designed for the vehicle, this number plate holder allows you to expose the aggressive front end of the car to improve the look. Great for removing and replacing the plate when cleaning or taking photos of the car. In addition to purchasing the full kit, you can also purchase extra adapter plates in order to hot swap between different number plates, for example custom car show plates and private registrations.\u003c\/p\u003e \u003cp\u003eDurable and reliable design. The quick-release pin ensures a secure hold, preventing the number plate from shifting or vibrating while driving. This system simplifies the process of changing or removing your plate for frequently. Apply and remove your plate in seconds. No tools or complex procedures are required.\u003c\/p\u003e \u003cp\u003eThis mounting system is compatible with number plates from all over the world, but please make careful judgement when purchasing. In the UK its ideal for shortened private registrations or square number plates but can also accommodate standard length ones. It is tricky to align UK standard length (520x111mm) ones in between the front parking sensor's, so its advised to get shortened ones to make it easier (you can acquire shorter 7 digit plates).\u003c\/p\u003e \u003cp\u003eUnlike other number plate holders, this mounts the plate at a similar angle to the body, making it more integrated and preventing it from sticking out as much. Although it still faces forward enough for it to be readable and legal.\u003c\/p\u003e \u003cp\u003eSimple screw-in installation makes it easy to do in seconds and does not require any drilling. Simply screw the bolt into your front tow hook, use the middle nut to adjust it until level, and apply the bracket in the correct location on the back of your number plate. Brackets, fixings and applied adhesive only, vehicle not included. The brackets are made of tough, durable and UV resistant PETG plastic.\u003c\/p\u003e","brand":"3D Cabin","offers":[{"title":"Full Kit","offer_id":54179026305409,"sku":"3D A90 THNPM 2 QR BLK","price":54.99,"currency_code":"GBP","in_stock":true},{"title":"Extra Adapter","offer_id":54179026338177,"sku":"3D A90 THNPM 2 QR (B) BLK","price":14.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0234\/6267\/4496\/files\/836a9bcd-02b5-4bfd-971c-7e914704d0a0.jpg?v=1743157012"},{"product_id":"headlight-access-cover-cap-compatible-with-bmw-x5-e53-p-n-224-557-00-replacement","title":"Headlight Access Cover Cap Compatible With BMW X5 E53 (p\/n 224-557-00) Replacement","description":"\u003cp\u003e\u003cstrong\u003e\u003cb\u003e\u003cspan\u003ePerfect Fit for BMW X5 E53\u003c\/span\u003e\u003c\/b\u003e\u003c\/strong\u003e - Designed for models with part number 224-557-00. Please check this is your part number before buying. Simply clips in like the original.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003e\u003cb\u003e\u003cspan\u003eSolve Common Headlight Issues\u003c\/span\u003e\u003c\/b\u003e\u003c\/strong\u003e - Ideal for replacing perished, cracked, or degraded access caps.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003e\u003cb\u003e\u003cspan\u003eRetain Original Seal\u003c\/span\u003e\u003c\/b\u003e\u003c\/strong\u003e - Simply reuse your existing rubber gasket for a reliable, weather-tight closure.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003e\u003cb\u003e\u003cspan\u003eLong-Lasting PETG Construction\u003c\/span\u003e\u003c\/b\u003e\u003c\/strong\u003e - Offers exceptional durability, and UV resistance.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003e\u003cb\u003e\u003cspan\u003ePackage Contents\u003c\/span\u003e\u003c\/b\u003e\u003c\/strong\u003e - Includes the headlight access cover cap only, headlight or rubber gasket not included.\u003c\/p\u003e","brand":"3D Cabin","offers":[{"title":"Default Title","offer_id":54240972407169,"sku":"3D E53 HAC 1 BLK","price":11.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0234\/6267\/4496\/files\/6c0d05ac-bb15-4a12-8c01-b67758c85af8.jpg?v=1744906650"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0234\/6267\/4496\/collections\/3dcabin-car-black-number-plate-mount-for-gr-supra-a90-mk5-v-front-tow-hook-35255995302039.jpg?v=1755179306","url":"https:\/\/www.3dcabin.co.uk\/en-intl\/collections\/cars.oembed","provider":"3D Cabin","version":"1.0","type":"link"}